The multi-function water pump control valve is one of the most popular valves at present, so do you know what are the main points of the installation of the multi-function water pump control valve?
Multifunctional water pump control valve Before installing the multifunctional water pump control valve, check whether the main valve is in good condition, whether the fasteners are loose, and whether the accessories are complete. Then, install it according to the installation drawing of the multifunctional water pump control valve. It should be noted that the position where the control pipeline of the multifunctional water pump control valve is connected to the main valve and the working state of the valve on the pipeline. A control pipe with a check valve, one end is connected to the lower chamber of the diaphragm, and the other end is connected to the valve inlet pipe.
The multi-function water pump control valve should be installed as horizontally as possible. Note that the direction indicated on the valve body is consistent with the direction of the water flow, and should not be installed in reverse. The exhaust valve and trap on the bonnet and diaphragm seat are the first multifunctional control valves.
When we all install the multifunctional water pump control valve, we should pay more attention to the above installation points. The correct installation and use of this control valve is what we need to do.