The multifunctional water pump control valve can automatically realize the slow opening when the pump is turned on, the quick closing and slow closing when the pump is stopped, without any electrical control, other power and manpower, and no hydraulic device. The multifunctional water pump control valve can replace three types of electric butterfly valves, check valves and water hammer eliminators. So everyone knows what are the functions and characteristics of the multifunctional water pump control valve?
The characteristics of the multifunctional water pump control valve are as follows: 1. The valve body adopts a full-channel, direct-flow and streamlined design. The hydraulic loss is small and the energy saving effect is good. 2. Easy to operate, no need to add a power distribution control system for the valve, the valve will automatically complete the control function in sequence with the opening and stopping of the water pump. Appropriate control parameters can be obtained by setting the opening of the regulating valve. 3. The effect of preventing water hammer is good, integrating the technology of slow opening, non-return quick closing, and slow closing to eliminate water hammer to reduce the damage to the water supply pipeline and the water pump due to the failure of the pump and the backflow of the pump and the water hammer.
The multi-function water pump control valve is an intelligent valve installed at the outlet of the water pump of the large-caliber water supply pipe network system, which is water hammer and water hammer. The multifunctional water pump control valve combines three functions of electric valve, check valve and water hammer eliminator, which can effectively improve the safety and reliability of the water supply system.
The multifunctional water pump control valve is installed at the outlet end of the water pump, and realizes the functions of slow opening, full opening, quick closing, and slow closing in sequence. This can prevent and weaken the water hammer and water hammer of the pipeline when the pump is opened and closed, prevent the backflow of water, protect the pump, and maintain the safety of the pipeline.