Can the multifunctional water pump control valve be installed vertically? It can be used vertically, but the direction should be correct. Generally, there are arrows on the valve to indicate low in and high out.
The multifunctional water pump control valve is an intelligent valve installed at the pump outlet of the water supply system of high-rise buildings and other water supply systems for water hammer and water hammer. It realizes the automation of water pump operation, simplifies management and improves reliability.
Before installing the multifunctional water pump control valve, first check whether the main valve is in good condition, the fasteners should not be loose, and the accessories are complete. Then, Fang Gong believed that the installation should be carried out according to the installation drawing of the multifunctional water pump control valve. Pay attention to the position where the control pipeline connects to the main valve and the working state of the valve on the pipeline. There is a control pipe with a check valve, one end is connected to the lower cavity of the diaphragm, and the other end is connected to the inlet pipe of the valve. One end of the other control pipe is connected to the upper cavity of the diaphragm, and one end is connected to the outlet pipe of the valve; the regulating and control valve should be fully open.
When we all install the multifunctional water pump control valve, we can install it according to the vertical installation method above. The correct installation of the multifunctional water pump control valve is what we all need.