The multifunctional water pump control valve is composed of a main valve, a regulating valve and a pipe connection system, and the valve body adopts a DC valve body. It is a kind of hydraulic control valve with powerful functions. It is composed of filter, solenoid valve and pilot valve, so that the flow can be adjusted in time when there are special circumstances, and the flow of the water pump can be effectively and multi-functionally controlled. The water pump control valve can be multifunctional such as waterproof hammer, filter impurities, etc., so it is called a multifunctional water pump control valve.
The multifunctional water pump control valve is used in steam, slurry, metallurgy, power station, plumbing, and generally uses large diameters, DN200mm-DN500mm. It is a relatively advantageous product for water conservancy control valves. In the pipeline, it can be controlled by universities. The flow rate is mainly because the control of the multifunctional water pump is more diverse and the structure is more complicated, so a lot of people will encounter many problems when using it. When we all install the multifunctional water pump control valve, we need to install it vertically. This is a balanced state, and the adjusted flow will not be restricted by the position, resulting in inaccurate flow adjustment.
The main valve control room of the multifunctional water pump control valve is a diaphragm or piston type double control room structure. The control room has one more control room than the general hydraulic control valve, which increases the control function of the main valve and realizes the slow opening of the pump outlet. , Full-open, slow-close, cut-off and other multi-function control, realize the multi-function control of the pump outlet with one valve and one adjustment.
When using the multifunctional water pump control valve, we can operate and use our valve according to the above instructions. The correct way to operate and use our valve is what we need.