When installing the multi-function water pump control valve, pay attention to checking and cleaning the pipeline, and there must be no foreign matter such as welding slag, bolts, etc. So everyone knows what are the precautions for the installation of the multifunctional water pump control valve?
Precautions for the installation of the multi-function water pump control valve: 1. Before installation, please check whether the main valve components are intact, the solid parts are complete, and there is no looseness.
2. Check that the connecting pipelines are intact and the joints are tight.
3. Ensure that the low operating pressure meets the requirements of technical parameters.
4. The installation method is to install the main valve on a horizontal pipeline with the valve cover facing upwards.
5. If the main valve is installed in the negative well, a certain space should be reserved for technicians to overhaul.
6. When installing, please pay attention to the direction indicated by the arrow outside the valve body, and do not install it backwards.
7. It is used for fire fighting to start inspection regularly to prevent the generation of scale and cause valve failure.
8. If you want to adjust the pressure and observe the working pressure, a pressure gauge must be installed at the inlet and outlet.
The installation of multi-function water pump control valve should be equipped with inlet and exhaust valves and other devices in accordance with the requirements of relevant regulations to ensure that no water column interruption occurs. When we all install the multifunctional water pump control valve, we can all install it according to the installation precautions above.