Can the multifunctional water pump control valve achieve these controls? And what is the qualitative difference between it and the traditional gate valve, butterfly valve, check valve, and constant-speed, two-speed slow-closing hydraulic control check valve in terms of principle and function.
The difference between multifunctional water pump control valve and check valve is as follows:
1. The multifunctional water pump control valve and check valve are both installed at the outlet of the water pump to prevent medium backflow, water hammer and water hammer. 2. The difference between the multifunctional water pump control valve and the check valve is the difference in structure. The multifunctional water pump control valve adds a hydraulic control room to the basic structure of the lift check valve to make the check valve open and close quickly. The function is changed to the function of slow opening and slow closing to eliminate water hammer, preventing the generation of water hammer when the pump is turned on and when the pump is stopped.
The opening direction and size of the multifunctional control valve are automatically controlled by intelligent settings, and can also achieve digital electronic automatic control. A check valve is a mechanical opening and closing valve, which only performs a single function of allowing fluid to flow in a prescribed direction, and does not require human command.
The difference between the multifunctional water pump control valve and the check valve is mainly the ones introduced above. All of us should now understand the difference between our control valve and the check valve.