The multifunctional water pump control valve is one of the most popular valves at present, so do you know how to install the multifunctional water pump control valve?
Multifunctional water pump control valve Before installing the multifunctional water pump control valve, check whether the main valve is intact, whether the fasteners are loose, and whether the accessories are complete. Then, install it according to the installation drawing of the multifunctional water pump control valve. It should be noted that the position where the control pipeline of the multifunctional water pump control valve is connected to the main valve and the working state of the valve on the pipeline. A control pipe with a check valve, one end is connected to the lower chamber of the diaphragm, and the other end is connected to the valve inlet pipe. One end of the other control pipe is connected to the upper chamber of the diaphragm, and the other end is connected to the outlet pipe of the valve.
  For the multi-function water pump control valve, please note that the direction indicated outside the valve body is consistent with the direction of the water flow, and must not be installed in reverse. The exhaust valve and trap on the bonnet and diaphragm seat are the first multifunctional control valves. When they are used, they are used for ventilation and drainage.
  When installing the multifunctional water pump control valve, we can install it according to the above installation method. When the multifunctional water pump control valve is installed correctly, we can install it according to the above installation method.